Digital Paint Discussion Board
Paintball 2: The Game => Server Discussion => Topic started by: sohan on August 21, 2008, 05:56:09 PM
-
1. My IP address is 92.17.247.140 and the port is 27910.
2. DP Resource Public Server Troubleshooter
Specified server information: 92.17.247.140:27910
Actual user IP address: Same as provided IP
RCON password provided? no
Run at Thu, 21 Aug 2008 23:38:14 +0000
TEST PROCESS
===================
> Checking if 92.17.247.140:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> Error: Read operation timed out, port is firewalled? data packet lost in transit?
> Failed to connect to server!
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> 13 entry/entries found in server list for your IP address:
> 92.17.247.140:55000
> 92.17.247.140:27910
> 92.17.247.140:55292
> 92.17.247.140:55459
> 92.17.247.140:55475
> 92.17.247.140:55578
> 92.17.247.140:55689
> 92.17.247.140:55708
> 92.17.247.140:55844
> 92.17.247.140:55909
> 92.17.247.140:55980
> 92.17.247.140:55983
> 92.17.247.140:56383
RECOMMENDATIONS
===================
* Your server may not even be running; try connecting to it on this computer: run /connect 127.0.0.1:27910 in console I tried this and amazingly I can play on the server and it even shows up on the serverlist. Even more amzing is the fact that the paint grenades never run out. They keep splurting paint :|
* Your server's port may not be forwarded; make sure you forward your ports for UDP port 27910 (and make sure it's set to the right computer address)
* Your server's port may be firewalled; make sure you allow port 27910 through your firewall
3.
(http://img136.imageshack.us/img136/9918/helpms9.png)
4. Port has been forwarded to router. I'm not sure if it blocked or not. I use ZoneAlarm (ZA) Security Suite. I disabled the ZA firewall completely and ran the test above^^ yet nothing different has happened.
Thanks
Sohan
-
Are you sure you forwarded it?
-
4. If this is a home server, make sure you know how to forward the port that your server uses from the WAN side (the port on your router hooked up to your cable modem, dsl modem, or whatever you use to connect to the internet) of your router to the LAN side ( the ports that connect to the pc's at your house) of your router. If you have questions on how to do this, post screen shots of your router config page showing the port forwarding setup.
From:
http://dplogin.com/forums/index.php?topic=13119.0
-
Yes I'm sure. I used the Quake 2 settings from Forward Port or something.
(http://img115.imageshack.us/img115/4770/helpmo3.png)
-
OK that's a start.
Now, SHow the page where you have the ip address assigned to the ports.
-
This is te best I could find to what you were asking for.
(http://img229.imageshack.us/img229/3218/helphc8.png)
-
whats the make and model of your router?
-
Thomson speedtouch 585 v6
-
(http://www.portforward.com/english/routers/port_forwarding/Thomson-Alcatel/SpeedTouch585/SpeedTouch5857.jpg)
Use the Device box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network. Select the application you created using the Game or Application drop down box. Then click Add to enable it.
Did you do that step?
http://www.portforward.com/english/routers/port_forwarding/Thomson-Alcatel/SpeedTouch585/default.htm
-
Errr. Yes I did. I chose 3a, which is the name of my computer. As a double check I also did it with the IP and it automtically converted it to 3a.
-
Anyone know what the problem is?? :|
Also, would it be possible to use www.10gbfreehost.com to make a server??
-
Also, would it be possible to use www.10gbfreehost.com to make a server??
Not at all. You need a server you can get a shell to, at the least.
-
Go to the server troubleshooter again and post your results
-
DP Resource Public Server Troubleshooter
Specified server information: 92.17.247.140:27910
Actual user IP address: Same as provided IP
RCON password provided? no
Run at Sat, 23 Aug 2008 23:13:15 +0000
TEST PROCESS
===================
> Checking if 92.17.247.140:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> Error: Read operation timed out, port is firewalled? data packet lost in transit?
> Failed to connect to server!
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> 1 entry/entries found in server list for your IP address:
> 92.17.247.140:51523
> None of the entries have the right port!
> Can't connect to the server, so potential port forwarding/firewall problem
RECOMMENDATIONS
===================
* Your server may not even be running; try connecting to it on this computer: run /connect 127.0.0.1:27910 in console
* Your server's port may not be forwarded; make sure you forward your ports for UDP port 27910 (and make sure it's set to the right computer address)
* Your server's port may be firewalled; make sure you allow port 27910 through your firewall
-
what os does your computer have?
-
you havent set up port forwarding correctly OR your windows firewall is blocking it.
-
Or ZA is, even if you disabled it. Enable it and explicitly allow incoming and outgoing data on UDP port 27910 for the application and/or network.
-
I'll answer all 3 questions here:
Microsoft XP
Windows Firewall is off and the Ports have been forwarded as its confirmed.
This is what I think the problem is. Getting round it is proving tricky though because ZA is like hell to use.
-
(http://img229.imageshack.us/img229/6738/helptw7.png)
There's what I'm faced with. :S :|
-
BINGO!!!
THat's ZA's firewall.
Diable it and see what happens first, then figure out how to set it up.
But, ZA will KILL your server performance as it performs its packet inpections.
-
Disabled it. Ran the server. No Luck whatsoever.
-
It most likely has something to do with forwarding the ports. I've had that problem before, it took me a few hours to figure out how to fix it. Try messing around with the last few numbers in the ip address you enter when forwarding the ports. Just change the last number or something, see if that'll work.
-
Like I said before. Rerun the server troubleshooter and post the results.
Randomly changing port numbers will do nothing but get you lost.